chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Evaporator Case|Service and Repair|Page 4447 > < Evaporator Case|Service and Repair
Page 2
background image

Blend Air Door Crank Linkage

3. Using a common pair of pliers, place one plier jaw on top of pivot shaft and the other jaw under the crank arm linkage and pinch the crank arm off

of the pivot shaft.

4. Disconnect the vacuum lines from the defrost and panel mode vacuum actuators and position them out of the way.
5. Remove three heater-A/C unit cover attaching screws going upward at the defroster outlet chamber.
6. Remove two heater-A/C unit cover attaching screws going upward at the air inlet plenum.

Heater A/C Unit Cover

Evaporator Case|Service and Repair|Page 4447 > < Evaporator Case|Service and Repair