Lebaron Sedan L4-153 2.5L SOHC Turbo VIN J FI (1991)
Throttle Position Sensor: Service and Repair
Throttle Position Sensor Replacement
1.
Disconnect the negative battery terminal.
2.
Disconnect the Throttle Position Sensor (TPS) wiring connector.
3.
Remove the mounting screws (2), and remove TPS from throttle shaft.
4.
Install new TPS on throttle shaft and install screws, torqueing them to 17 lbs. in. (2 N-m).
5.
Connect the TPS wiring connector.
6.
Connect the negative battery cable.
