Lebaron Sedan V6-181 2972cc 3.0L SOHC VIN 3 MFI (1994)
5. Refer to for proper placement of shims
6. Tighten the four brake support plate and spindle to axle mounting bolts until snug, then torque bolts to 55 ft-lbs.
7. Install brake drum, then install washer and nut. Torque adjusting nut to 20-25 ft-lbs while rotating wheel, then back off adjusting nut with wrench
to completely release bearing preload. Finger tighten adjusting nut.
8. Position locknut with one pair of slots inline with cotter pin hole, then install cotter pin. Endplay should be 0.001-0.003 inch.
9. Install grease cap, then wheel and tire assembly. Torque lug nuts to 95 ft-lbs.
10. Inspect alignment to ensure measurements are within specifications.
