chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Throttle Body > < Diagram Information and Instructions|Page 2886
Page 1
background image

Throttle Position Sensor: Service and Repair

Throttle Body Connections

Throttle Body View With Idle Air Control (IAC) Motor

 
Removal

 

1. Disconnect negative battery cable.
2. Disconnect sensor wiring at sensor. 
3. Remove mounting screws (2), and lift sensor off throttle shaft.

 
Installation

 

1. Install sensor and tighten screws to 17 in-lbs (2 Nm)
2. Connect sensor electrical connector.
3. Connect negative battery cable.

Throttle Body > < Diagram Information and Instructions|Page 2886