chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

All Technical Service Bulletins for Fuel Flow Sensor: > < Fuel System - Engine Sag/Poor Performance|Page 3451
Page 9
background image

Close the top part of the clip over the hoses, attach clip with original hose clip screw, and tighten securely.

FIGURE 5

12.

Type Authorized Modification Label, PN 4275086, as shown in Figure 5 and attach near VECI label.

13.

Check the pressure regulator, fuel reservoir, and hose clip for secure mounting. Check all fuel hoses for proper routing, making sure they are not
contacting any sharp metal edges. Insure clamps are tight and make sure no sharp edges or clamp screws are contacting adjacent hoses or wires.

14.

Start the engine and check the entire system for fuel leaks.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:
Labor Operation No.

14-70-11-98 ...... ........ .. ...... ....    

0.9 Hrs.

FAILURE CODE:

AM - Authorized Modification

All Technical Service Bulletins for Fuel Flow Sensor: > < Fuel System - Engine Sag/Poor Performance|Page 3451