chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Campaign - Sticking Oil Pump Relief Valve|Page 937 > < Campaign - Sticking Oil Pump Relief Valve|Page 935
Page 4
background image

FIGURE 3

Service Procedure

A.

Domestic Vehicles (Continued)

4.

s. Right engine mount lower attaching nut. Remove. (See Figure 3.)

t.

Lower hoist to support vehicle at floor level.

u.

Right engine mount: Remove remaining attachments from engine and side rail (Figure 3) and remove engine mount.

v.

Right engine mounting plate:

Detach from chain case cover and remove.

w.

Raise vehicle on hoist.

x.

Crankshaft pulley: Remove.

y.

Timing indicator bracket and alternator-to-chain case cover bracket: Remove.

z.

Oil pan: Remove. aa. Chain case cover:  Remove. Take care not to damage cylinder head gasket.

FIGURE 4

5.

IMPORTANT:  Rotate engine crankshaft until timing marks on all

(3)

silent shaft chain sprockets are aligned with the corresponding timing marks on the silent shaft chain. The timing marks on the sprockets are the
punch marks on the teeth while those on the chain are the plated links. (See Figure 4.)

6.

Remove silent shaft chain guide "B" (Figure 4).

Service Procedure

A.

Domestic Vehicles (Continued)

Campaign - Sticking Oil Pump Relief Valve|Page 937 > < Campaign - Sticking Oil Pump Relief Valve|Page 935