Lebaron Town & Country L4-156 2.6L SOHC VIN G 2-bbl (1984)
Connect hose assembly, PN 4307763, from the pressure regulator outlet (upper fitting) to the fuel flow sensor inlet nipple, routing the hose as shown in
Figure 7. When installing hose clamp, PN 6500650, at the flow sensor, locate the clamp screw and tangs on the lower side of the hose so no sharp metal
edges contact the fuel filter-to-fuel pump hose. Torque to 10 inch pounds.
FIGURE 4 - FUEL RESERVOIR & PRESSURE REGULATOR CONNECTIONS WITHOUT FUEL FLOW SENSOR
11.
Place the four fuel hoses listed below in clip, PN 4307242, starting with the hose closest to the attaching screw (Figure 4).
a.
Chassis fuel supply line to fuel filter inlet hose.
