chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Fuel System - Engine Sag/Poor Performance|Page 137 > < Wiper Control Module|Locations|Page 126
Page 1
background image

Fuel Flow Sensor: Customer Interest
Fuel System - Engine Sag/Poor Performance

Models

1981, 1982 and

1983 Through 1985 Aries/Reliant/Dodge 400/600/LeBaron/ E-Class/Caravelle/ New Yorker Front Wheel Drive Vehicles Equipped With 2.6L Engine

Subject

Sag and/or Poor Performance Due to Fuel Foaming

Index

DRIVEABILITY

Date

March 25, 1985

No.

18-06-85
This bulletin has been updated by bulletin # 18-06-86, dated 02/03/86, to include model years 1981 and 1982.

This bulletin supersedes Technical Service Bulletin # 14-48-84 for subject vehicles equipped with 2.6L engine.

SYMPTOM/CONDITION

Engine sags and/or exhibits poor performance following a hot soak restart. This condition occurs when cool incoming fuel meets the hot fuel in the
carburetor fuel bowl which creates an over rich condition. Engine will start (unloading technique may be necessary).

DIAGNOSIS

Engine must be fully warmed up (fuel foaming does not affect cold engine driveability). The following are characteristics of fuel foaming:

^

Occurs primarily after hot soak restart or prolonged idle only on medium to heavy acceleration.

^

Sag is due to rich fuel mixture.

^

Black smoke at tailpipe.

^

Fuel pressure is normal.

^

Raw fuel at carburetor air horn.

^

Good accelerator pump discharge.

^

Will immediately start (unloading technique may be necessary).

PARTS REQUIRED

Pressure Regulator & Fuel Reservoir Package PN 4342937

Contains:

1 -

Pressure Regulator Assembly

PN 4307234

1 -

Pressure Regulator Bracket

PN 4306973

3 -

Screw - Self-Tapping Bracket to Body

PN 6031991

2 -

Screw - Self-Tapping Pressure Regulator to Bracket

PN 6033066

1 -

Fuel Reservoir Assembly

PN 4307358

8 -

Hose Clamp - 1/4"

PN 6500650

1 -  Y-Connector Hose Assembly

PN 4307397

1 -

Hose Assembly - Reservoir to Pressure Regulator (18.5")

PN 4307762

1 -

Hose Assembly - Pressure Regulator to Carburetor (24")

PN 4307763

1 -

Clip - Hose-to-Valve Cover - Four Position

PN 4307242

1 -

Template - Pressure Regulator Bracket

PN 4275240

1 -

Fuel Flow Sensor Inlet Nipple (30~)

PN 4307236

1 -

Convolute Tube - 6" Long (fuel filter-to-fuel pump hose)

PN 4279993

Fuel System - Engine Sag/Poor Performance|Page 137 > < Wiper Control Module|Locations|Page 126