LHS V6-3.5L VIN G (1998)
Glove Compartment: Service and Repair
Glove Box Lamp/Switch Assembly Replacement
REMOVAL
Negative Battery Cable Remote Terminal
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
Glove Box Lamp/Switch
2. Open the glove box door, and pull out the glove box lamp/switch assembly from upper right hand corner of opening.
3. Replace the lamp if necessary.
4. To replace the lamp/switch assembly, disconnect the wire connector.
5. Remove the lamp/switch assembly
INSTALLATION
-
For installation, reverse the above procedures.