LHS V6-3.5L VIN G (1998)
Brake Rotor/Disc: Specifications
Brake Rotor Specifications
Brake Rotor Specifications
BRAKE ROTOR
Front
Rear
BRAKE ROTOR TYPE
Ventilated
Solid
ROTOR THICKNESS
25.87 - 26.13 mm (1.019 - 1.029 in.)
11.63 - 12.13 mm (0.458 - 0.478 in.)
MINIMUM ROTOR THICKNESS
24.4 mm (0.961 in.)
10.4 mm (0.409 in.)
Minimum allowable thickness markings are cast/stamped on an
un-machined surface of the rotor. This marking includes
0.76 mm (0.030 in.) allowable rotor wear beyond the
recommended 0.76 mm (0.030 in.) of rotor refacing.
ROTOR THICKNESS VARIATION
0.013 mm (0.0005 in.)
0.013 mm (0.0005 in.)
ROTOR RUNOUT *
0.08 mm (0.003 in.)
0.08 mm (0.003 in.)
* TIR - Total Indicator Reading (measured on vehicle)
ROTOR MICRO-FINISH
15 - 80 RMS
15 - 80 RMS
Minimum Brake Rotor Thickness Markings