LHS V6-3.5L VIN G (1998)
Accelerator Pedal: Service and Repair
Fig 29 Accelerator Pedal And Throttle Cable
Fig 30 Throttle Cable Removal/Installation
REMOVAL
1. Working from the engine compartment, hold the throttle body throttle lever in the wide open position. Remove the throttle cable from the throttle
body cam.
2. From inside the vehicle, hold up the pedal and remove the cable retainer and throttle cable from the upper end of the pedal shaft (Fig. 29) and (Fig.
30).
Fig 31 Accelerator Pedal Removal/Installation
3. Working from the passenger compartment, remove nuts from accelerator pedal base (Fig. 31). Remove pedal and base from vehicle.