LHS V6-3.5L VIN G (1998)
Vacuum Reservoir: Service and Repair
Fig 56 Vacuum Reservoir
REMOVAL
1. Disconnect the negative battery cable.
2. Remove air inlet hose and resonator box and air cleaner top.
3. Remove the 3 fasteners from vacuum reservoir (Fig. 56).
4. Remove electrical connector.
5. Remove vacuum hoses.
6. Remove vacuum reservoir.
INSTALLATION
1. Install vacuum hoses to reservoir.
2. Install electrical connector.
3. Install 3 fasteners and tighten.
4. Install air inlet hose and resonator box and air cleaner top.
5. Connect the negative battery cable.