LHS V6-3.5L VIN G (1998)
Clutch: Description and Operation
Clutch Assembly
Each of the three clutches in the input clutch assembly supply input power to a particular component in the planetary gear train when they are
hydraulically applied. They are connected to the planetary gear-train through the overdrive hub assembly, underdrive hub assembly and the front sun
gear assembly. When any of these clutches are applied, they turn or drive a component which is an input to the planetary gear-train.
Input Clutch
The input clutch assembly is located directly behind the oil pump housing, and rides on the reaction shaft support journal. The assembly consists of the
following:
-
Input shaft
-
Input hub
-
Clutch retainer
-
Clutch pistons
-
Overdrive hub
-
Underdrive hub Three input clutches (Underdrive clutch, Overdrive clutch and Reverse clutch)
When the torque converter turbine turns, the input shaft, hub and clutch retainer also turn.
Low Reverse Clutch