New Yorker L4-153 2.5L SOHC VIN K TBI (1986)
Throttle Position Sensor: Service and Repair
Throttle Position Sensor (TSP) replacement
1.
Disconnect battery ground cable, then remove air cleaner.
2.
Disconnect three-way connector at throttle position sensor (TPS), then remove TPS to throttle body mounting screws.
3.
Lift TPS from throttle shaft, then remove O-ring.
4.
Reverse procedure to install. Install new O-ring and torque TPS to throttle body mounting screw to 20 inch lbs.