New Yorker V6-181 2972cc 3.0L SOHC VIN 3 FI (1989)
Brake Caliper: Service and Repair
Rear Dust Boot Replacement
Fig. 8 Removing Dust Boot
Fig. 9 Dust Boot Installation
1.
Clean area around dust boot with suitable solvent.
2.
Remove dust boot from caliper and piston grooves.
3.
Clean piston and caliper grooves, then coat new boot with clean brake fluid.
4.
Place boot over piston and into piston groove, then position in counterbore of caliper.
5.
Using suitable tools, drive dust boot into counterbore.
