New Yorker V6-181 2972cc 3.0L SOHC VIN 3 FI (1989)
Brake Pad: Service and Repair
Rear
Fig. 2 Removing Brake Pad Retainer Pin
Fig. 3 Caliper Mounting Bolt Locations
REMOVAL
1.
Raise and properly support vehicle.
2.
Remove rear wheel and tire assembly, and ensure parking brake is released.
3.
Pump brake pedal, then manually pull caliper assembly toward outside of vehicle so that piston will retract.
4.
Drive brake pad retainer pin out of caliper.
5.
Remove caliper mounting bolts, then the caliper by lifting upward and away from disc. Support caliper with suitable wire. Do not allow caliper to
hang by brake hose.
6.
Remove brake pads and anti-rattle clip.
INSTALLATION
1.
Lubricate adapter ways with suitable grease.
