New Yorker V6-181 2972cc 3.0L SOHC VIN 3 FI (1989)
Fig. 6 Anti-rattle Clip & Retainer Pin Positioning
4.
Insert anti-rattle clip through opening in caliper as shown. Place lower portion of clip in position first, then release. Ensure clip falls into correct
position.
5.
Install brake pad retainer pin through caliper and pads. Drive into position using hammer and suitable drift.
Fig. 7 Applying Downward Pressure To Caliper
6.
Push down on upper portion of caliper to load anti-rattle clip.
7.
Install upper mounting bolt first, then the lower bolt. Torque bolts to specifications.
8.
Install wheel and tire assembly, then lower vehicle.
