New Yorker V6-181 2972cc 3.0L SOHC VIN 3 FI (1989)
Suspension Strut / Shock Absorber: Service and Repair
Air Shock Absorber Replacement
1. Disconnect battery negative cable and raise vehicle, then remove tire assembly.
2. Disconnect height sensor connector, located on RH frame rail.
3.
Remove air lines from Shock Absorber. See: Suspension Control ( Automatic - Electronic )/Air Line/Service and Repair
4.
Support rear axle with suitable stand.
5. Remove upper and lower shock absorber mounting bolts and remove shock absorber.
6. Reverse procedure to install.
