New Yorker V6-181 2972cc 3.0L SOHC VIN 3 FI (1989)
Figure 4(3-Speed Transmission)
Figure 5(4-Speed Transmission)
IMPORTANT:
Illustration is typical of 4-speed hose routing. 3-speed hose routing differs; therefore it is important to identify the cooler
"in" and "out" hoses per Figures 4 and 5.
Figure 1
7.
Slide 2 of the supplied clamps over the hose ends and install the cooler "in" end connectors of the bypass valve assembly to the cut hose ends.
NOTE:
Refer to Figure 1 to identify the male (pipe nipple) end of the valve. This end of the assembly.must be connected to the cooler "in"