New Yorker V6-3.5L VIN F (1994)
Rear Seat Belt Retractor
REAR SEAT BELT RETRACTOR REMOVAL
1. Remove upper quarter trim panels.
2. Remove one lower quarter trim panel.
3. Remove parcel shelf trim cover.
4. Remove bolt holding lower seat belt anchor to floor below quarter trim.
5. Remove bolt holding belt retractor to shelf panel.
6. Separate belt from vehicle.
INSTALLATION
1. Place belt in position on vehicle.
2. Install bolt to hold belt retractor to shelf panel.
3. Install bolt to hold lower seat belt anchor to floor below quarter trim.
4. Install parcel shelf trim cover.
5. Install lower quarter trim panel.
6. Install upper quarter trim panels.
