New Yorker V6-3.5L VIN F (1994)
Ignition Lock: Service and Repair
Ignition Interlock Service
With Column Shifter
Fig. 3 Ignition Interlock Cassette
Fig. 4 Latch And Shifter Gate
Fig. 5 Interlock Adjustment Tab
COLUMN SHIFT
The interlock cassette slides into the housing behind the lock cylinder. The cable at the rear of the cassette attaches to a locking arm on the shifter
mechanism. The column shift interlock system is only adjusted after installing a new cassette. The cassette cannot be adjusted more than once. If
the system operates incorrectly, install and adjust a new interlock cassette.
Removal
1.
Disarm airbag as outlined under "Precautions."
2.
Disconnect battery ground cable.
3.
Remove tilt lever then upper and lower column covers.
4.
Depress tab on top of cassette, then slide cassette out of housing.
5.
Remove cable from locking arm on shifter mechanism.
Installation
1.
Ensure latch rotates freely on shifter gate.