Pacifica V6-3.8L (2008)
Antenna Cable: Service and Repair
Instrument Panel Antenna Cable
Removal
REMOVAL
WARNING: On vehicles equipped with airbags, refer to Restraints before attempting any steering wheel, steering column, or instrument panel
component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal
injury.
1. Disconnect and isolate the battery negative cable.
2. Remove glove box.
3. Disconnect instrument panel antenna cable from antenna cable.
4. Disconnect cable hanger clip from HVAC unit.
5. Remove radio See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Removal and Replacement/Radio/Removal.
CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable
or radio.
6. Disconnect the antenna cable by pulling the locking antenna connector away from the radio.
7. Remove cable from vehicle.
Installation
INSTALLATION
1. Install instrument panel antenna cable to vehicle.
2. Connect cable to back of radio.
3. Install radio See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Removal and Replacement/Radio/Installation.
4. Connect cable hanger clip to HVAC unit.
5. Connect instrument panel antenna cable to antenna cable.
6. Install glove box.
7. Connect the battery negative cable.
