Pacifica V6-3.8L (2008)
Front Bumper Cover / Fascia: Service and Repair
Front Fascia - Installation
INSTALLATION
1. Position upper (1) and lower (2) fascia on a clean surface so that locking tabs (3) align with the slots.
2. Press the fascia together to lock locking tabs into position.
3. Install grille to fascia. See: Grille/Service and Repair/Grille - Installation.
4. Place front fascia into position on vehicle.
5. Install push pins (2) and fasteners (1) attaching the fascia panel (6) to upper crossmember.
6. Raise vehicle and support with safety stands, as necessary.
7. Connect fog lamp wire connectors, if necessary.See: Lighting and Horns/Fog/Driving Lamp/Service and Repair/Fog Lamp - Installation
8. Install fasteners (4) attaching fascia to the front fenders on each side.
9. Install front wheelhouse splash shields fasteners and push pins as necessary See: Splash Guard/Service and Repair/Accessory Drive Splash Shield
- Installation See: Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Splash Shield - Installation.
10. Install the five push pins (3) attaching bottom of fascia/air dam to radiator closure panel. Push pins are reusable.
11. Lower vehicle.
