Pacifica V6-3.8L (2008)
Luggage Rack: Service and Repair
Rack-Luggage Crossbar
Removal
REMOVAL
1. Remove luggage rack assembly. See: Rack-Luggage/Removal.
2. Depress crossbar lever down on each side of crossbar to unlock.
3. Remove crossbar(s) from side rails by sliding bar off the front of the side rails.
Installation
INSTALLATION
1. Place side rails in position on a clean flat surface. Starting at front end of side rails slide cross bars onto side rails.
2. Place cross bars into position on side rails and press the lower edge of the cross bar lever to lock it into position on each side.
3. Place luggage rack assembly into position on vehicle.
4. Install luggage rack assembly. See: Rack-Luggage/Installation.
5. Lock luggage rack crossbars into position. Pull stanchion levers up on both sides into the lock position.
6. Verify that the crossbars are secure to side rails. If loose remove and reinstall crossbars.