Pacifica V6-3.8L (2008)
Map Light: Service and Repair
Illumination Lamp
Removal
REMOVAL
The Instrument Panel Switch Pod has two illumination lamps (1). If found to be faulty, the entire cluster bezel must be removed. The Light Emitting
Diodes (LED's) are serviceable by turning 1/4 turn counterclockwise to remove. The cluster bezel must first be removed to service the LED's See:
Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and Repair/Instrument Panel Cluster Bezel - Removal.
Installation
INSTALLATION
1. Place Light Emitting Diode (LED) into lamp opening (1) in instrument panel switch pod.
2. Turn 1/4 turn clockwise.
3. Install Cluster bezel See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and Repair/Instrument Panel
Cluster Bezel - Installation.
