Pacifica V6-3.8L (2008)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor - Installation
INSTALLATION
1. Apply bearing grease (supplied with part) to sensor head shaft and O-ring.
CAUTION: Ensure that sensor mounting surface on bearing is clean before sensor installation.
2. Push sensor head (2) into mounting hole in hub and bearing (3) and align mounting screw hole.
3. Install NEW mounting screw (1). Tighten mounting screw to 6 Nm (55 in. lbs.).
4. Install hub and bearing with wheel speed sensor as well as all components necessary to access it. See: Maintenance/Wheels and Tires/Wheel
Bearing/Service and Repair/Rear Hub / Bearing - Installation
5. Road test vehicle to ensure proper operation of the base brakes and ABS.
