Pacifica V6-3.8L (2008)
4. Disconnect coolant temperature sensor (at thermostat housing). Remove engine harness-to-cylinder head bolt. Position harness out of the way.
Install and secure lift/support bracket and bolt 8534-7 (1).
5. Assemble 8534-2 (2) mounting bracket/sleeve assemblies to support tube 8534-1 (1) and install to vehicle, allowing brackets to rest on inner
fender ledges.
6. Assemble cross-bar 8534-3 (1), clamp 8534-5 (2) and support leg 8534-4 (3) to support tube, allowing support leg to rest on radiator upper
support.
