chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Garage Door Opener Transmitter|Description|Page 8267 > < Procedures|Page 8262
Page 1
background image

Garage Door Opener Transmitter: Description and Operation
Description

DESCRIPTION

Some vehicles are equipped with a Universal Transmitter transceiver. The universal transmitter transceiver is located in the drivers side sun visor
assembly. The only visible component of the universal transmitter are the three transmitter push buttons. The three universal transmitter push buttons are
identified with raised buttons and contain a transmit indicator that lights during operation and programming functions.

Each of the three universal transmitter push buttons controls an independent radio transmitter channel. Each of these three channels can be trained to
transmit a different radio frequency signal for the remote operation of garage door openers, motorized gate openers, home or office lighting, security
systems or just about any other device that can be equipped with a radio receiver in the 280 to 435 Megahertz (MHz) frequency range for remote
operation. The universal transmitter is capable of operating systems using either rolling code or non-rolling code technology. The system will not
transmit operating signals if the Vehicle Theft Security System is armed.

The universal transmitter cannot be repaired, and is available for service only as a visor assembly. If any part of the component is inoperative or
damaged, the complete visor assembly must be replaced.

Garage Door Opener Transmitter|Description|Page 8267 > < Procedures|Page 8262