PT Cruiser L4-2.4L (2008)
Front Bumper Cover / Fascia: Service and Repair
Front Fascia - Removal
REMOVAL
1. Remove grille. See: Grille/Service and Repair/Grille - Removal.
2. Remove three screws attaching splash shield to fascia to access fender flange on each side of vehicle.
3. Remove spring nuts fasteners attaching fascia to fender flange.
4. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair.
5. Remove three screws attaching air dam (3) and lower fascia to the radiator support crossmember.
6. Lower vehicle.
7. Remove two fasteners attaching fascia (2) to the fender bracket.
8. Remove fascia to access the fog lamp wire connectors and disconnect, if equipped.