PT Cruiser L4-2.4L (2008)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Panel-Chmsl Cover
Removal
REMOVAL
1. To access the CHMSL (3), disengage the snap retainers (2) that secure the CHMSL cover panel (4) to the liftgate (1) using a trim stick C-4755 or
equivalent flat bladed tool.
2. Remove the CHMSL cover panel from the vehicle.
Installation
INSTALLATION
1. Position the CHMSL cover panel (4) over the CHMSL (3) on the inside of the liftgate (1).
2. Engage the snap retainers (2) that secure the CHMSL cover panel to the liftgate. Start at the center of the cover panel and work outward using the
palm of your hand to fully engage the retainers to the liftgate.