PT Cruiser L4-2.4L (2008)
Trunk Trim Panel - Installation
INSTALLATION - CONVERTIBLE
1. Place trunk side trim panel into position (2).
2. Push clips on trunk side trim panel (2) to the seated position.
3. Install push pin fastener (1).
4. Connect power outlet/cargo lamp, if equipped.
5. Install decklid sill scuff plate, trunk trim panel (2), and trunk plug (1). See: Scuff Plate/Service and Repair/Decklid Sill Scuff Plate - Installation.
Removal - Convertible
REMOVAL - CONVERTIBLE