PT Cruiser L4-2.4L (2008)
Convertible Top Relay: Service and Repair
Installation
INSTALLATION
1. Position the motor/hydraulic pump relay (2) onto the relay bracket and push into place so that the retaining tab is fully seated.
2. Connect the motor/hydraulic pump relay wire harness connector (3).
3. Install the foam pump cover.
4. Install the well liner/carpet into the power top well.
5. Install the rear seat back, See: Seats/Seat Back/Service and Repair/Seat Back - Installation.
6. Connect the battery negative cable.
7. Verify normal power top system operation.
