PT Cruiser L4-2.4L (2008)
5. Install the side J-strap.
6. Install the front J-strap (2).
7. Install push pins (1).
8. Install the seat back. See: Seat Back/Service and Repair/Seat Back - Installation.
9. Install the seat into vehicle See: Service and Repair/Seat - Installation.
Rear - Coupe
COUPE
1. Position seat cover on cushion.
2. Align seat cover with cushion alignment indentations.
3. Install hog rings.
4. Engage J-strap attaching seat cover to cushion frame.
5. Install rear seat and track assembly. Tighten front track to pan bolts to 12 Nm (9 ft. lbs.).
6. Install seat back.
7. Install rear seat cushion side shields.