PT Cruiser L4-2.4L (2008)
Front Door Weatherstrip: Service and Repair
Retainer-A-Pillar Weatherstrip - Convertible
Removal-Convertible
REMOVAL-CONVERTIBLE
1. Remove the header and A-pillar weatherstrip (3) as necessary to gain access to the A-pillar weatherstrip retainer (1) See: Convertible Top
Weatherstrip/Service and Repair/Weatherstrip-Header/A-Pillar - Convertible/Removal - Convertible.
2. Remove the four screws (2) that secure the A-pillar weatherstrip retainer to the A-pillar (4) and remove the retainer.
Installation - Convertible
INSTALLATION - CONVERTIBLE
1. Position the A-pillar weatherstrip retainer (1) onto the A-pillar (4).
2. Install the five screws (2) that secure the A-pillar weatherstrip retainer to the A-pillar. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Install the header and A-pillar weatherstrip (3) See: Convertible Top Weatherstrip/Service and Repair/Weatherstrip-Header/A-Pillar -
Convertible/Installation - Convertible.