PT Cruiser L4-2.4L (2008)
19. Remove all bed plate bolts from the engine block.
20. Using a mallet gently tap the bedplate loose from the engine block dowel pins.
CAUTION: Do not pry up on one side of the bed plate. Damage may occur to cylinder block to bed plate alignment and thrust bearing.
21. Bed plate should be removed evenly from the cylinder block dowel pins to prevent damage to the dowel pins and thrust bearing.
CAUTION: Use extreme care when handling crankshaft. Target ring damage can occur if crankshaft is mis-handled.
22. Lift out crankshaft from cylinder block. Do not damage the main bearings or journals when removing the crankshaft.
23. Remove the target ring mounting screws and discard.
24. Remove the target ring from the crankshaft.
Crankshaft - Installation
INSTALLATION - CRANKSHAFT
CRANKSHAFT MAIN BEARING LOCATION
