PT Cruiser L4-2.4L (2008)
Oil Filter Adapter: Service and Repair
Installation
INSTALLATION
1. Clean all gasket sealing surfaces
2. Install gasket (2) and filter adaptor (1) to oil pan. Tighten bolts to 12 Nm (105 in. lbs.).
3. Turbocharger Equipped Vehicles:
-
Replace oil cooler seal
-
Lubricate seal and position oil cooler to oil filter adapter (1), aligning notch to tab
-
Install oil cooler connector bolt. Torque connector bolt to 55 Nm (41 ft. lbs.)
4. Install oil filterSee: Oil Filter/Service and Repair/Removal and Replacement/Installation.
5. Lower vehicle and check engine oil level. Adjust level as necessary.