PT Cruiser L4-2.4L (2008)
Intake Manifold: Removal and Replacement
Lower Intake Manifold
LOWER INTAKE MANIFOLD
WARNING: Release fuel system pressure before servicing system components. Service vehicles in well ventilated areas and avoid ignition
sources. Never smoke while servicing the vehicle.
NOTE: Turbo charged engines could be equipped with either an aluminum or a plastic intake manifold.
1. Perform fuel system pressure release procedure before attempting any repairs See: Cylinder Head Assembly/Fuel Pressure Release/Service
and Repair.
2. Disconnect negative battery cable (1).
3. Remove upper intake manifold See: Intake Manifold - Removal.
4. Partially drain (2) cooling system below thermostat level.