PT Cruiser L4-2.4L (2008)
Front Crankshaft Seal: Service and Repair
Removal
REMOVAL
1. Remove the crankshaft vibration damperSee: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and Repair/Vibration
Damper - Removal.
2. Remove timing beltSee: Timing Components/Timing Belt/Service and Repair/Timing Belt & Sprockets - Removal.
3. Remove crankshaft sprocket (3) using Crankshaft Sprocket Remover 6793 (1) and Crankshaft Sprocket Remover Insert C-4685-C2 (2).
CAUTION: Do not nick shaft seal surface or seal bore.
4. Use Crankshaft Front Seal Remover 6771 (1) to remove front crankshaft oil seal. Be careful not to damage the seal surface of cover.
