PT Cruiser L4-2.4L (2008)
5. Connect the right floor distribution duct (2) to the right rear floor duct (3) and the outlet located on the right side of the HVAC air distribution
housing (4).
6. Install the screw (1) that secures the right floor distribution duct to the air distribution housing. Tighten the screw to 2 Nm (17 in. lbs.).
7. Install the floor center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console - Installation.
8. Install the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -
Installation.
9. Install the passenger side instrument panel silencer See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Silencer Panel - Installation.
10. Reconnect the negative battery cable.
