PT Cruiser L4-2.4L (2008)
Leak Detector: Service and Repair
Removal
REMOVAL
1. Release fuel pressure, See: Fuel Delivery and Air Induction/Fuel Filter/Fuel Pressure Release/Service and Repair.
2. Remove the air cleaner lid, disconnect the inlet air temperature sensor and makeup air hose.
3. Remove the negative battery cable.
4. Raise vehicle and support.
5. Drain fuel tank, See: Fuel Delivery and Air Induction/Service and Repair.
6. Remove fuel tank and EVAP system,See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Fuel Tank - Removal.
7. Remove hoses from NVLD assembly.
8. Remove the bolts from the NVLD Assembly.