PT Cruiser L4-2.4L (2008)
Leak Detector: Service and Repair
Installation
INSTALLATION
1. Install NVLD assembly to the bracket (1).
2. Install assembly to the fuel tank.
3. Install hoses and lines.
4. Install the fuel tank and EVAP system, refer to the Fuel Tank removal/installation section in the Fuel Delivery section.See: Fuel Delivery and Air
Induction/Fuel Tank/Service and Repair/Fuel Tank - Installation.
5. Lower vehicle.
6. Install the negative battery cable.
7. Install the air cleaner lid, connect the inlet air temperature sensor and makeup air hose.
8. Fill fuel tank. Use the scan tool to pressurize the fuel system. Check for leaks.
