PT Cruiser L4-2.4L (2008)
Idle Speed/Throttle Actuator - Electronic: Description and Operation
Operation
OPERATION
The PCM adjusts engine idle speed through the idle air control valve to compensate for engine load, coolant temperature or barometric pressure changes.
The throttle body has an air bypass passage that provides air for the engine during closed throttle idle. The idle air control valve regulates air flow
through the bypass passage.
The PCM controls engine idle speed by adjusting the position of the idle air control valve. The adjustments are based on inputs the PCM receives. The
inputs are from the throttle position sensor, crankshaft position sensor, coolant temperature sensor, MAP sensor, vehicle speed sensor and various switch
operations (brake, park/neutral, air conditioning).
When engine rpm is above idle speed, the IAC is used for the following functions:
-
Off-idle dashpot
-
Deceleration air flow control
-
A/C compressor load control (also opens the passage slightly before the compressor is engaged so that the engine rpm does not dip down when the
compressor engages)
Target Idle
Target idle is determined by the following inputs:
-
Gear position
-
ECT Sensor
-
Battery voltage
-
Ambient/Battery Temperature Sensor
-
VSS
-
TPS
-
MAP Sensor
