PT Cruiser L4-2.4L (2008)
Ignition Coil: Description and Operation
Operation
OPERATION
WARNING: The direct ignition system generates approximately 40,000 volts. Personal injury could result from contact with this system.
High tension leads route to each cylinder from the coil. The coil fires two spark plugs every power stroke. One plug is the cylinder under compression,
the other cylinder fires on the exhaust stroke. Coil number one fires cylinders 1 and 4. Coil number two fires cylinders 2 and 3. The PCM determines
which of the coils to charge and fire at the correct time.
The Auto Shutdown (ASD) relay provides battery voltage to the ignition coil. The PCM provides a ground contact (circuit) for energizing the coil. When
the PCM breaks the contact, the energy in the coil primary transfers to the secondary causing the spark. The PCM will de-energize the ASD relay if it
does not receive the crankshaft position sensor and camshaft position sensor inputs.
