PT Cruiser L4-2.4L (2008)
Seat Belt: Service and Repair
Removal
REMOVAL
Before removing the cinch bar, verify that the cinch bar holds the belt from sliding through the latch plate. See: Powertrain Management/Computers and
Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Seat Belt Cinch Bar Verification
Test. If the cinch bar components are not present in the seat belt latch plate, go directly to the installation procedure. See: Installation.
1. Using a small screwdriver or equivalent (1), release the two cinch bar cover catches (4).
2. Remove and discard the cinch bar cover (1), the cinch bar (4) and the two small springs (3).
