PT Cruiser L4-2.4L (2008)
4. If equipped with a rear stabilizer bar, on each side, remove the bolt (3) securing the stabilizer bar cushion retainer (1) to the rear axle (2). Lift each
retainer from the slot in the axle allowing the stabilizer bar to hang free.
5. Position a transmission jack or equivalent under the center of the axle raising it enough to support the axle.
6. On each side, remove the lower mounting bolt (5), nut (7) and washer (6) securing the shock absorber (2) to the axle (4).
7. Lower the transmission jack until the coil springs (2) can be removed from the axle.
8. Remove the coil springs (2) and rubber isolators (1, 3).
