PT Cruiser L4-2.4L (2008)
9. Position the notch (1) formed into the edge of the upper seat straight out away from the compressor. It should line up with the very end of the coil
spring coil.
10. Install the strut upper mount (7) over the strut shaft, onto the top of the upper spring seat and bearing (6). Position the mount so that the third
mounting stud on the mount top is inward toward the compressor, opposite the clevis bracket.
CAUTION: Never use impact or high speed tools to install the strut shaft nut. Damage to the strut internal bearings may occur.
11. Loosely install the retaining nut on the strut shaft (8).
12. Position Strut Nut Wrench (2), Special Tool 6864, on the strut shaft retaining nut. Next, install a socket on the hex on the end of the strut shaft.