PT Cruiser L4-2.4L (2008)
6. Remove two pedal assembly bracket to instrument panel nuts.
7. Remove four brake booster/pedal bracket-to-dash panel nuts.
8. From under the hood, pull brake master cylinder/booster far enough forward to obtain pedal to bracket stud clearance.
9. Remove the pedal bracket assembly (1).
10. Remove pedal pivot shaft and remove brake and clutch pedals (3).
11. Remove the interlock/upstop switch assembly (1,2) from the brake/clutch pedal bracket assembly by depressing the four plastic wing tabs on each
switch.