PT Cruiser L4-2.4L (2008)
Power Window Switch: Service and Repair
Removal
REMOVAL
Front
1. Disconnect and isolate the battery negative cable.
2. Remove bezel, refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
3. Disconnect electrical harness connector.
4. Using a trim stick (1) (special tool # C-4755) or equivalent, gently pry switch from the bezel.
Rear-Sedan Only
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick (special tool # C-4755) or equivalent, gently pry at the top of the switch.
3. Remove switch and disconnect electrical harness connectors.