PT Cruiser L4-2.4L (2008)
Rear Door Window Regulator: Service and Repair
Rear Door Window Regulator - Removal
REMOVAL
1. Remove door trim panel and watershield.
2. Remove door glass from regulator channel. Secure glass in the door frame in the "UP" position.
3. Remove fasteners attaching window regulator channel and crank motor to door panel.
4. Disengage wiring at clip.
5. Disengage regulator from door panel, and motor housing.
6. Slide regulator rearward and rotate forward end of channel through access hole in door panel.
7. Remove window regulator from door through access hole in inner panel.