PT Cruiser L4-2.4L Turbo (2009)
Body Emblem: Service and Repair
Nameplate - Installation
INSTALLATION
NOTE: Sedan model shown in illustration. Convertible model similar.
1. Clean panel surfaces with isopropyl alcohol.
2. Remove the backing paper from the adhesive tape on the new exterior name plates (1, 3 and 4).
3. Position the exterior name plates to the front door (1) and decklid or liftgate (5) (depending on application) and align the name plates to the
previously marked locations, as required.
4. Install and press the exterior name plates securely to ensure the adhesive fully adheres to the body panels.
5. Clean away the reference points previously marked.